Annual Inspections of Single Buoy Mooring

Overview

RockSalt Subsea provides annual pre-berthing inspections of a single buoy mooring, where the CP and UT readings are recorded up to the depth of 30 metres.
Further subsea construction works include subsea hose changeouts, inspections of clamps on pipelines, anode changeouts and chain cleaning.

Diving Mode of Operation

Surface Supplied Air Diving is carried out from a diving support vessel. This is mobilised from the quayside to travel onwards to the SPM. The dive system consists of a IMCA system with a 3-diver air panel and chamber. Breathing from passive air banks installed on the vessel.

Case Studies

Single buoy mooring diving project, Ireland - RockSalt Subsea

Annual Inspections of Single Buoy Mooring

RockSalt Subsea provides annual pre-berthing inspections of a single buoy mooring, where the CP and UT readings are recorded up ...

+ Read More

Diving Team Call Outs

Diving Team Call Outs It’s not uncommon for vessels to encounter obstructions that require inspection and removal. This can often ...

+ Read More

OPT Buoy De-Ballasting

The Project RockSalt provided diving services for a client at Nigg Port for OPT Buoy De-Ballasting. Diving Mode of Operation ...

+ Read More

RockSalt Subsea Engineering & Technical Authority

Personnel Supply for New Build Vessel

Supply of Personnel - New Build Vessel The Atair is a research vessel, which was built in Germany. It commenced ...

+ Read More

Rothesay Ferry Terminal – Scour Baffle Installation

Rothesay Ferry Terminal - Scour Baffle Installation Rothsay harbour lies on the Isle of Bute on the west coast of ...

+ Read More

Recovery and Changeout of SUTU

RockSalt provided diving services as part of a recovery and changeout operation for a SUTU Subsea Termination Unit at EMEC’s ...

+ Read More

Chris Soper, Project Manager – Kongsberg

RockSalt provided us with a team of skilled electrical technicians during a critical phase of installation. The experience of the personnel working under our Site Management team helped ensure a controlled installation process in line with the scheduling. Our Site Management team also found a strong improvement on overall quality control with the technicians providing the first completion inspections meaning that fewer punch items were raised during customer inspections. In addition, we utilised a RockSalt technician on a longer-term basis within our QHSE team with very positive effect to our site activities both in terms of safety on the job as well as overall installation quality, especially in relation to ATEX equipment.

Garson Miller – Diving Technical Authority

I have known Tony for many years and he has a wealth of experience in the offshore / onshore diving industry. Over the years I have found Tony to be extremely professinal in his role; he has demonstrated on many occasions how familiar he is with the HSE Diving at Work Regulations, IMCA guidance and company processes and operating procedures. Tony is well respected in the diving industry, which leads to a good working relationship with clients.

Craig McCall – Agency Supervisor

From the first time I met Tony French back in 2016, when he was in the early days of developing the Rocksalt Subsea business, I was more than impressed with his professionalism and passion for the company, services offered and safety. He kept close contact with us during the development stages and once everything was in place we were more than happy to use RockSalt Subsea ourselves and to promote them to our clients. We have had nothing but good feedback from the Captains of our vessels, in particular how the operation has been carried out in a timely, safe and controlled manner. Since then, we have used RockSalt many times and they have become our number one supplier for dive services.

Roger Lowe – Offshore Project Manager

Tony has always demonstrated excellent skill levels in his diving knowledge, both technical and theoretical. He has shown to have a very good all round knowledge of the diving world, in terms of legislation (HSE), guidlines (IMCA), Class etc. He has proven success in what he can contribute, as shown when he mobilised both diving spreads on a DSV and also daughter craft for the DSV for a contract in Denmark, that proved very successful for the company and the client.